The wave soldering process took its name from the fact that the process uses a tank containing the molten solder. In this process, the electronic components are inserted into the PCB in its right place and they the PCB is passed through a wave solder metal. The molten solder passing through the area discovered metal and creates an electrical connection between components. The areas in which the connections are not made, is protected by solder mask. The wave soldering process is faster than the manual welding process, but creates a quality product in less time compared with that in manual welding. Wave soldering process can be used for both holed PCB or PCB mounted. But in the case of the circuit board mounted electronic components are located on the PCB, with the help of glue, before posing for the solder wave. Now together with hole most of the components have been replaced by exterior mounted components, the wave solder reflow has been replaced by welding method in a kind of large-scale electronic application.
Although there are many types of wave soldering machines available today, but the basic principle of operation of all machines are equal. A wave soldering machine typically consists of three main areas: first is the area Fluxing, second Preheating zone of welding. Although some of the machines have an additional one quarter of the area of cleaning, but this depends on the exchange rate used. Optimizer wave welding – welding optimizer Wave is one of the highly urbanized, accurate, and easy to use tool in the wave soldering process modern era.